contact tsc pic

TSC manufactures a wide range of API and proprietary drill pipe products ranging from 2-7/8" to 6-5/8" OD in range 2 or range 3 lengths. Manufacturing begins with the highest quality raw materials from leading tube and tool joint manufacturers whose products are produced to TSC's demanding specifications. Our specifications exceed those of API and allow for exceptional quality of the finished product. As a result, we are able to guarantee 95% minimum wall thickness on all drill pipe we produce. The processing of tubes and tool joints, as well as the welding, is performed in-house to strict manufacturing specifications, procedures, and quality control. TSC incorporates strict engineering controls in the weld line processes to ensure the consistent quality of every joint.

We produce drill pipe to all API grades (E-75, X-95, G-105, S-135) as well as numerous proprietary grades, which among others, include NS-1 and IRP sour service grades. In addition, TSC's own proprietary grades are available for service requirements exceeding those of API. These grades include TSC-140, TSC-150, TSC-95CY, TSC-G105CY and TSC-105SS and offer either higher strength or improved corrosion resistance beyond API products.

TSC drill pipe is offered with API's full range of connections or with proprietary high torque connections. Four double-shoulder high torque connections are offered: the TSDS series, the PTech+ series, the SSDS series, and the ATDS series. These connections exceed the capabilities of API connections and are easy and quick to run as well as economical.

We offer the following services: hard banding - offered with a selection of hard metal products, make and break services and internal plastic coating according to customer preferences.

If you are interested in acquiring drill pipe contact our drill pipe division, TSC DRILL PIPE, directly.

Technical data regarding our drill pipe products, including tool joint dimensions, is available at TSC DRILL PIPE
Tool Joint Designation Size and Style Nom. Wt. LB/FT Available Grades
NC31 2 7/8 EU 10.40 E75, X95, G105, S135
NC38 3 1/2 EU 9.50 E75
NC38 3 1/2 EU 13.30 E75, X95, G105, S135
NC38 3 1/2 EU 15.50 E75, X95, G105
NC38 (1) 3 1/2 EU 15.50 S135
NC40 4 IU 14.00 E75, X95, G105, S135
NC46 4 EU 14.00 E75, X95, G105, S135
NC46 4 1/2 IU 13.75 E75
NC46 4 1/2 IEU 16.60 E75, X95, G105, S135
NC46 4 1/2 IEU 20.00 E75, X95, G105, S135
NC50 4 1/2 EU 13.75 E75
NC50 4 1/2 EU 16.60 E75, X95, G105, S135
NC50 4 1/2 EU 20.00 E75, X95, G105, S135
NC50 5 IEU 19.50 E75, X95, G105, S135
NC50 5 IEU 25.60 E75, X95, G105
5 1/2 FH 5 IEU 19.50 E75, X95, G105, S135
5 1/2 FH 5 IEU 25.60 E75, X95, G105, S135
5 1/2 FH 5 1/2 IEU 21.90 E75, X95, G105, S135
5 1/2 FH 5 1/2 IEU 24.70 E75, X95, G105, S135
6 5/8 FH 6 5/8 IEU 25.20 E75, X95, G105, S135
6 5/8 FH 6 5/8 IEU 27.70 E75, X95, G105, S135
(1) Typical industry requirements call for NC38, but we do offer the API recommendation of NC40

TSDS PA110009d Vertical

Contact TSC Drill Pipe

Phone: (832) 230-8228

Fax: (281) 741-9914

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

www.drillpipe.com

Texas Steel Conversion is an API licensed 5CT processor and 5DP, 7-1 manufacturer.

Texas Steel Conversion’s Quality Management System is in compliance with ISO9001 and API-Q1.