We produce drill pipe to all API grades (E-75, X-95, G-105, S-135) as well as numerous proprietary grades, which among others, include NS-1 and IRP sour service grades. In addition, TSC's own proprietary grades are available for service requirements exceeding those of API. These grades include TSC-140, TSC-150, TSC-95CY, TSC-G105CY and TSC-105SS and offer either higher strength or improved corrosion resistance beyond API products.
TSC drill pipe is offered with API's full range of connections or with proprietary high torque connections. Four double-shoulder high torque connections are offered: the TSDS series, the PTech+ series, the SSDS series, and the ATDS series. These connections exceed the capabilities of API connections and are easy and quick to run as well as economical.
We offer the following services: hard banding - offered with a selection of hard metal products, make and break services and internal plastic coating according to customer preferences.
If you are interested in acquiring drill pipe contact our drill pipe division, TSC DRILL PIPE, directly.
|Technical data regarding our drill pipe products, including tool joint dimensions, is available at TSC DRILL PIPE|
|Tool Joint Designation||Size and Style||Nom. Wt. LB/FT||Available Grades|
|NC31||2 7/8 EU||10.40||E75, X95, G105, S135|
|NC38||3 1/2 EU||9.50||E75|
|NC38||3 1/2 EU||13.30||E75, X95, G105, S135|
|NC38||3 1/2 EU||15.50||E75, X95, G105|
|NC38 (1)||3 1/2 EU||15.50||S135|
|NC40||4 IU||14.00||E75, X95, G105, S135|
|NC46||4 EU||14.00||E75, X95, G105, S135|
|NC46||4 1/2 IU||13.75||E75|
|NC46||4 1/2 IEU||16.60||E75, X95, G105, S135|
|NC46||4 1/2 IEU||20.00||E75, X95, G105, S135|
|NC50||4 1/2 EU||13.75||E75|
|NC50||4 1/2 EU||16.60||E75, X95, G105, S135|
|NC50||4 1/2 EU||20.00||E75, X95, G105, S135|
|NC50||5 IEU||19.50||E75, X95, G105, S135|
|NC50||5 IEU||25.60||E75, X95, G105|
|5 1/2 FH||5 IEU||19.50||E75, X95, G105, S135|
|5 1/2 FH||5 IEU||25.60||E75, X95, G105, S135|
|5 1/2 FH||5 1/2 IEU||21.90||E75, X95, G105, S135|
|5 1/2 FH||5 1/2 IEU||24.70||E75, X95, G105, S135|
|6 5/8 FH||6 5/8 IEU||25.20||E75, X95, G105, S135|
|6 5/8 FH||6 5/8 IEU||27.70||E75, X95, G105, S135|
|(1) Typical industry requirements call for NC38, but we do offer the API recommendation of NC40|